Round Handcrafted Epoxy Coffee Table 15" to 35" Diameter

• A River You Look Down Into: A black epoxy seam runs across natural wood, and at coffee height, you see it from straight above, like dark water held between two banks of grain.
• Sealed for the Long Run: Three coats of PU and a beeswax topcoat on the surface, four coats of PU beneath. The finish stays glossy and smooth through years of mugs, books, and feet up on the edge.
• A Low Matte Black Base: The Flux base is a single steel cone in flat matte black, wide at the floor and tapering up. At 16 inches, it holds the round at the height you reach from a sofa.
• Takes Round or Square Tops: The mounting plate fits round and square tops without changes, so the base finishes the table cleanly and stays useful if you ever swap the surface.
• Even Footing, Any Floor: Leveling feet thread into the base, so a rug edge or an uneven floor won’t leave the table rocking. It settles flat and stays there.
• Quick Setup: Hardware and instructions ship in the box. With a 2nd person, it goes from packed to standing in about twenty minutes.
• Holds 500 Lbs Easily: Rated for up to 500 lbs of evenly distributed load, far past anything a coffee table is asked to carry.

Table Set: 1 base + 1 table top

Available Table Top Sizes:

• 15" diameter round
• 19" diameter round
• 23" diameter round
• 29" diameter round
• 35" diameter round (includes steel C-channel support)

Tabletop Thickness: 1.3" - 1.8" (3.3 cm - 4.6 cm)

Top Finish: 3 coats PU + 1 coat beeswax (top face), 4 coats PU (underside)

Table Base: Flux, 16" H, matte black steel

Finished Table Height: 17" - 18" H (standard coffee table height) 

Weight Capacity: Up to 500 lbs (evenly distributed load)

Base Finish: Matte black steel

Complete Hardware Kit Includes:

• Threaded insert nuts (6mm x 16mm), pre-installed in the tabletop
• Securing bolts (4mm x 22mm)
• Hex key set (4mm and 6mm)

*C-channel supports are steel reinforcements fitted under tops over 29" to keep the wider span flat and rigid.

*The included screws may not work with hardwood. We recommend using our thread nut kit for proper installation. We are not liable for damage from using the included screws.

*Refer to the final product image for precise dimensions.

• A round coffee table anchoring a sofa-and-chairs arrangement
• Soft-edged center for a room with too many straight lines
• Wide surface for trays, books, and a coffee setup left out on display
• Low conversation piece you can see clearly from across the room
• A living room centerpiece that warms up a cool, modern space

Custom Orders Available: Need a different size or a quantity run for a commercial space? We build to order and welcome the detail work. Most custom projects are completed within 12 weeks. 

Every Table is Different: Because each piece is handmade from natural wood, small size variations are normal.

• Small Rounds (under 22"): ±0.05" - 0.1" tolerance
• Medium Rounds (23" - under 52"): ±0.1" - 0.2" tolerance
• Large Rounds (over 52"): ±0.4" tolerance
• Square Tables: ±0.1" - 0.2" tolerance
• Rectangle Tables: ±0.04" - 0.08" tolerance

Shipping and Returns: Every order goes out with free standard shipping. If something isn't right when it arrives, you have 7 days from delivery to reach out. Warehouse pickup is also available.

Taking Care of Your Table: A damp microfiber cloth handles regular cleaning without any fuss. Keep sharp objects, strong cleaners, and prolonged heat or moisture away from the surface.

(*) Customs duties, taxes, and clearance fees are not included in the item price. If you're ordering internationally, check your country's import fees beforehand.

(*) See more of our work at https://lumbergrand.com/collections. Questions, or ordering in bulk? Reach out at lumbergrand.com or email contact@lumbergrand.com, and we'll help as soon as we can.