Round Epoxy Table Top 15" to 35" for Handcrafted Tables

• Solid Hardwood, Black Epoxy: The top is hardwood, its grain and color carried right across the surface, with a black epoxy line set through it. The wood is the substance, the black is the contrast.
• A Solid Four-Layer Top: Three coats of PU and a beeswax topcoat on the surface, four coats of PU beneath. Smooth, glossy, and built to take mugs, books, and feet up on the edge.
• Coffee Height on Matte Black: The Flux base is one steel cone in flat matte black, wide at the floor and tapering up. At 16 inches, it sits low, right where you reach from a sofa or a chair.
• Many Sizes, One Design: Choose 15, 19, 23, 29, or 35 inches across. The hardwood top, the black line, and the matte base hold steady the whole way, so only the footprint changes. The 35-inch top adds steel C-channel supports underneath to keep the wider span flat.
• Fits Round and Square: The mounting plate takes round and square tops without changes, so the base finishes the table cleanly and stays useful if you ever swap the surface.
• Flat on Any Floor: Leveling feet thread into the base, so a rug edge or an uneven floor will not leave the table rocking. It settles flat and stays there.
• Fast Setup: Hardware and instructions ship in the box. With a second person, it goes from packed to standing in only 20 minutes.
• 500-Lb Rating: Rated for up to 500 lbs of evenly distributed load, far past anything a coffee table is asked to carry.

Table Set: 1 base + 1 table top

Available Table Top Sizes:

• 15" diameter round
• 19" diameter round
• 23" diameter round
• 29" diameter round
• 35" diameter round (includes steel C-channel support)

Tabletop Thickness: 1.3" - 1.8" (3.3 cm - 4.6 cm)

Top Finish: 3 coats PU + 1 coat beeswax (top face), 4 coats PU (underside)

Table Base: Flux, 16" H, matte black steel

Finished Table Height: 17" - 18" H (standard coffee table height) 

Weight Capacity: Up to 500 lbs (evenly distributed load)

Base Finish: Matte black steel

Complete Hardware Kit Includes:

• Threaded insert nuts (6mm x 16mm), pre-installed in the tabletop
• Securing bolts (4mm x 22mm)
• Hex key set (4mm and 6mm)

*C-channel supports are steel reinforcements fitted under tops over 29" to keep the wider span flat and rigid.

*The included screws may not work with hardwood. We recommend using our thread nut kit for proper installation. We are not liable for damage from using the included screws.

*Refer to the final product image for precise dimensions.

• 15-inch round as a low accent beside an armchair
• 19-inch round coffee table for a small two-seater setup
• 23-inch round for an apartment living room
• 29-inch round centering a sofa and chairs
• 35-inch round for a wide, open lounge

Custom Orders Available: Need a different size or a quantity run for a commercial space? We build to order and welcome the detail work. Most custom projects are completed within 12 weeks. 

Every Table is Different: Because each piece is handmade from natural wood, small size variations are normal.

• Small Rounds (under 22"): ±0.05" - 0.1" tolerance
• Medium Rounds (23" - under 52"): ±0.1" - 0.2" tolerance
• Large Rounds (over 52"): ±0.4" tolerance
• Square Tables: ±0.1" - 0.2" tolerance
• Rectangle Tables: ±0.04" - 0.08" tolerance

Shipping and Returns: Every order goes out with free standard shipping. If something isn't right when it arrives, you have 7 days from delivery to reach out. Warehouse pickup is also available.

Taking Care of Your Table: A damp microfiber cloth handles regular cleaning without any fuss. Keep sharp objects, strong cleaners, and prolonged heat or moisture away from the surface.

(*) Customs duties, taxes, and clearance fees are not included in the item price. If you're ordering internationally, check your country's import fees beforehand.

(*) See more of our work at https://lumbergrand.com/collections. Questions, or ordering in bulk? Reach out at lumbergrand.com or email contact@lumbergrand.com, and we'll help as soon as we can.