What’s the Best Way to Create an Epoxy Resin Glitter Table Top?

You’ve got an old table sitting around, and you’re not quite ready to throw it away. So why not give it a bold, sparkly upgrade with an epoxy resin glitter table top? With just some clear epoxy and a bit of glitter, you can turn that plain surface into a custom piece that’s fun, durable, and totally eye catching. This guide from Lumber Grand will walk you through every step.

How to Make an Epoxy Resin Glitter Table Top?

Transforming a plain table into a dazzling piece is a fun and rewarding epoxy resin wood DIY table top project. Ready to get started with Lumber Grand? Follow these 4 main steps to make your own epoxy resin glitter table top!

1. Step 1: Tools & Materials You’ll Need

Gather the following items before starting your epoxy resin glitter table top project:

Wooden table top: You should make sure it’s clean and level.
Epoxy resin: Choose a resin designed for table tops, like TotalBoat High Performance or ProMarine Table Top Resin. For a standard 1/8-inch thick coating, one gallon of mixed resin will cover approximately 12 square feet. Calculate the amount needed based on your table's dimensions.
Loose glitter: Pick your favorite glitter epoxy table top colors; a mix of fine and jumbo glitter works best.
Sandpaper: Sanding the table top helps the epoxy stick better. Use sandpaper 120-grit for the best result.
Foam brush or squeegee: These help you spread the resin evenly.
Mixing cups and stir sticks: For mixing the resin parts together.
Torch or heat gun: You’ll need this to pop any air bubbles in the resin after you pour it.
Rubber gloves and safety glasses: These are a must to protect yourself from any epoxy splashes.
Plastic cover: Lay this down to protect your workspace in case of any resin drips.
Painter’s tape: Helps create neat edges or build a dam if your table doesn’t have a lip.

Everything you need to make a stunning epoxy resin glitter table top
Photo: Art Resin

2. Step 2: Surface Prep - How to Get a Smooth Start?

First things first, before starting with the epoxy resin glitter table top, you need to clean your table. You don’t want any dust or dirt on it before applying the resin. A damp cloth with dish soap should do the trick. Make sure it’s totally dry before moving forward.

Next comes sanding. Lightly sand the surface with medium grit sandpaper (120 grit works well). This creates a textured surface that helps the epoxy stick. After sanding, wipe the surface down with a dry cloth or tack cloth to remove any dust.

Want to add a little extra flair? Paint your table before you start the resin. For example, black paint will make the glitter pop and give the table depth. If you go this route, make sure to let the paint fully dry before moving to the next step. Drying time will vary depending on the type of paint, but at least 24 hours is a safe bet.

Taking your time on prep may not be the most exciting part, but it is absolutely worth it
Photo: ©Aris Leoven on Canva.com

3. Step 3: Mixing & Pouring the Glitter Epoxy

For most epoxy resin glitter table tops, you’ll be working with two components when you mix the resin: Part A (the resin) and Part B (the hardener). Combine them in a 1:1 ratio, and stir slowly for about 3 to 5 minutes until the mixture is smooth and fully blended. Be patient, because any unmixed streaks could mess with the final cure.

Once your resin is ready, it’s time to add some sparkle. At Lumber Grand, we recommend mixing jumbo glitter for bold, eye catching flakes with fine glitter to fill in the gaps and add extra shine.

When you start pouring, take it slow. Instead of dumping all the resin at once, work in layers. This gives you more control and helps avoid an uneven finish. Since the resin has a thick, honey like texture, you’ll need to work quickly. Use a foam brush or squeegee to spread it out smoothly across the surface.

Pro tip: If you're aiming for that bold “all glitter, no table” look, let the epoxy flow over the edges so it naturally drips down the sides. This creates a glossy finish that wraps the entire surface in sparkle from top to edge!

Mixing in the glitter is when the magic happens, you’ll see your table come to life!
Photo: Naptime Creations

4. Step 4: Removing Bubbles & Achieving a Glossy Finish

After pouring the epoxy, your next move is to tackle any air bubbles that might have formed. Use a torch or heat gun and slowly wave it over the surface, keeping it about 6 to 8 inches away. The gentle heat will help release trapped bubbles without scorching the resin. Taking your time with this step ensures your epoxy resin glitter table top comes out smooth, even, and with that flawless glossy finish you're aiming for.

After you've removed the bubbles, let the table sit in a dust-free area and cure for at least 72 hours. Epoxy resin cures best at temperatures between 72-74°F (22-24°C) and relative humidity levels between 40-60%. You want it to be completely set before you handle or move it around. For more creative table top upgrades, explore our epoxy penny table top guide to try a different fun, eye catching look!

Epoxy resin needs time to fully harden, so be patient for your epoxy resin glitter table
Photo: Laci Jane

Pro Tips for a Flawless Glitter Table Top

Here are 3 pro tips from Lumber Grand to ensure your epoxy resin glitter table top turns out flawless:

Keep Glitter Evenly Suspended: Stir the glitter well into the epoxy to prevent clumping and ensure an even sparkle.
Avoid Yellowing or Fisheyes: Use high quality resin and follow mixing instructions carefully to prevent imperfections from forming.
Add a Clear Topcoat: Once the epoxy has fully cured, apply a polyurethane topcoat for added shine and extra durability. Don’t forget to check out more unique epoxy table top ideas to get creative with your table tops.

Want to make your table the star of the room? Start your glitter table top project today, and let your creativity shine! If you have questions? Click at https://lumbergrand.com/pages/contact. Plus, check out our other table top guides for more inspiration.

Creating an epoxy resin glitter table top is an easy and fun DIY project that will instantly transform your old table into a stunning centerpiece. With just a few simple steps from Lumber Grand, you’ll achieve a beautiful, durable surface that sparkles and adds personality to any space!

Rating

★ ★ ★ ★ ★ (1)