Flower Epoxy Table: DIY Guide, Design Ideas & 5+ Best Styles

Epoxy resin opens up endless possibilities for creative furniture design, and nothing captures timeless beauty quite like a flower epoxy table. In this guide, Lumber Grand will walk you through the entire process - from preparing flowers to pouring epoxy - along with design inspiration and essential care tips.

How to Make a Flower Epoxy Table? DIY Guide

Creating a flower epoxy table DIY is all about patience and precision. Below is a step-by-step guide to ensure your flowers stay beautifully preserved in crystal-clear resin.

1. Step 1: Prepare Tools, Materials Handle Flowers

One of the biggest challenges when working with flowers is keeping them from floating to the top of the epoxy. Since flowers are lightweight, they tend to float as the resin cures. To keep them in place, try 3 tips:

• Apply a thin sealing layer of epoxy first and let it become tacky before adding flowers.
  
• Use a spray adhesive, like Krylon Clear Spray Adhesive, to lightly secure the flowers to the base before pouring.
  
• Place a thin acrylic sheet or wax paper over the flowers for weight.

Fresh flowers contain moisture, which can cause bubbles, decay, and discoloration inside the resin. Instead, use dried or pressed flowers for your epoxy table:

• Pressing flowers: You should place flowers between parchment paper and press them under heavy books for at least a week.
  
• Drying flowers: You should use silica gel or hang flowers upside down in a dry, dark space for 1-2 weeks.

Pressed flowers are best for epoxy
Photo: Resin Crafts Blog

2. Step 2: Layout and Flower Arrangement

This is where your artistic vision comes to life! Before pouring epoxy, take time to arrange the flowers in a way that complements the shape:

• Symmetrical layout: Great for a balanced, structured design.
  
• Organic flow: Mimics a natural, scattered flower garden.
  
• Layering technique: Placing flowers at different heights within multiple resin layers adds depth.

3. Step 3: Mix and Pour Epoxy Resin

For a durable, crystal-clear finish, use UV-resistant, non-yellowing epoxy. The best choices for DIY flower epoxy table include:

• Deep pour epoxy (for layers up to 2 inches thick) - Best for creating table tops with multiple layers of flowers, giving a stunning 3D effect.
  
• Table top epoxy (for thinner coats, typically 1/8 inch) - Perfect for smaller projects or as a final protective layer over a deep-pour resin base.

4. Step 4: Remove Air Bubbles

Bubbles can ruin the clarity of your epoxy flower table. To eliminate them, you may try these tips from Lumber Grand:

• Use a heat gun or torch on low to pop surface bubbles.
  
• Let the mixed epoxy sit for 5 minutes before pouring to allow bubbles to rise.
  
• Stir gently - aggressive mixing introduces excess air.

5. Step 5: Wait for the Surface to Cure and Finish

Epoxy takes time to cure, and rushing the process can lead to imperfections. Follow 3 guidelines for your flower epoxy table:

• Soft cure: 12-24 hours (avoid touching!) - If you try to touch or move it too soon, you might end up with unwanted marks or indentations on the surface.
  

• Full cure: 3-7 days (before heavy use) - Avoid placing heavy objects, applying pressure, or exposing it to excessive heat during this period, as the resin is still in its curing phase and can be easily damaged.
  

• Final sanding polishing: Use fine-grit sandpaper and a resin polish to create a glass-like shine. This final step enhances the depth and brilliance of your epoxy table, making the embedded flowers look even more vibrant and lifelike.

Full curing takes up to 7 days - rushing the process can lead to imperfections
Photo: Positive Couple

6. Mistakes How to Avoid Them

Mistakes happen, but they don’t have to ruin your flower epoxy table. Here’s what might go wrong and how to fix it:

• Cloudy epoxy? That’s probably moisture trapped in the flowers! Make sure they’re completely dry before you start. Using silica gel or a dehydrator works best.
  

• Sticky surface? If your table feels tacky even after curing, chances are the resin and hardener weren’t mixed properly! Measure carefully and stir thoroughly for at least 3-5 minutes, making sure to scrape the sides of your container.
  

• Yellowing over time? Sunlight is the culprit! Epoxy can discolor with UV exposure, so use a high-quality, UV-resistant resin and keep your table out of direct sunlight as much as possible.

Some Design Ideas Styles for a Flower Epoxy Table Top

Looking for inspiration to elevate your epoxy projects? These creative designs from Lumber Grand will turn your epoxy resin flower table top DIY project into a masterpiece:

1. Epoxy Resin Flower Dining Table

A dining table with embedded flowers makes a stunning centerpiece. You may choose larger flowers like roses or sunflowers for a bold effect.

A bold centerpiece featuring large, vibrant flowers like roses or sunflowers
Photo: Etsy

2. Epoxy Resin Flower Coffee Table

A coffee table with delicate wildflowers or petals adds a whimsical, nature-inspired touch to any living space, would be a wonderful choice for your place!

Wildflowers and delicate petals add a whimsical, nature-inspired touch
Photo: ThunderWood Studio

3. Epoxy Resin Flower Side Table

Small but elegant, a flower-infused side table top is perfect for adding a subtle yet eye-catching accent to bedrooms or lounges. You may want to advance your living place with it.

A compact yet eye-catching design perfect for bedrooms and lounges
Photo: Happiness Blooms

4. Epoxy Resin Flower Kitchen Countertop

For a truly unique kitchen, embed dried herbs and edible flowers into an epoxy resin countertop to blend beauty with function. Your kitchen will be much more elegant with this design.

Dried herbs and edible flowers turn a countertop into a functional work of art
Photo: Christine Kallop on Pinterest.com

5. Other Epoxy Resin Flower Products

If you love the flower epoxy table aesthetic, you can expand your creativity into:

• Flower resin coasters: Perfect for adding a delicate, handmade touch to your coffee table.
  
• Resin serving trays with floral designs: A functional piece that turns every tea time into an aesthetic moment.
  
• Epoxy resin wall art with pressed flowers: A creative way to preserve nature’s beauty and decorate your space.
• Epoxy penny table top with flowers: Combine the timeless appeal of pennies with epoxy and add some pressed flowers for a nature inspired design.

How to Maintain and Protect Your Flower Epoxy Table?

A flower epoxy table is durable, but a little care goes a long way in preserving its clarity and beauty, you should try these ways to maintain and protect your DIY table:

• Avoid direct sunlight: Even UV-resistant epoxy can yellow your flower epoxy table over time.
  
• Clean gently: Use a soft cloth and mild soap for your table avoid abrasive cleaners.
  
• Use coasters: Heat can soften epoxy, so protect the table’s surface from hot items.
  
• Recoat when needed: If scratches appear on your table, a thin recoat of epoxy can restore the shine.

Ready to start your own epoxy flower table? Check out our other DIY guides and contact Lumber Grand.

Creating a flower epoxy table is a fulfilling project that blends nature with artistry. With the right materials, careful flower preparation, and attention to detail, you can craft a stunning epoxy resin flower table top that lasts for years. Whether it’s a dining table, coffee table, or countertop, this unique design will always be a conversation starter!